模具加工是現在很多企業都會選擇做得事業，當然也不全是一帆風順的，有一些問題的產生是不可避免的，所以就需要提早去了解。那么模具加工設置冷卻水道有什么要了解的？
Mold processing is now a lot of enterprises will choose to do the cause, of course, it is not all plain sailing, there are some problems is inevitable, so it is necessary to understand in advance. So what is there to know about the mold processing setting cooling channel?
模具在冷卻水道設置的因素有：模具結構形式。如普通模具、細長型芯的模具、復雜型芯的模具及脫模機構障礙多或鑲塊多的模具。模具的大小和冷卻面積。注塑件的形狀和壁厚。
The factors for setting the mold in the cooling channel are as follows: mold structure. Such as ordinary mold, long thin core mold, complex core mold and release mechanism more obstacles or insert more mold. Mold size and cooling area. Shape and wall thickness of injection molded parts.
模具在冷卻水道設置的原則有孔通過鑲塊時，應考慮鑲套管和加裝密封圈的問題，以防止冷卻水泄瀾；水孔管路應暢通無阻；水管接頭和冷卻水嘴的位置，盡可能放置在不影響操作的一側；冷卻水孔管路不要設置在模具型腔塑料熔接的位置，以免影響注塑件的強度。
When the mold has a hole through the insert block in the principle of setting the cooling channel, the insert sleeve and the sealing ring should be considered to prevent the leakage of cooling water; Water hole pipeline should be unimpeded; The position of water pipe joint and cooling water nozzle should be placed on the side that does not affect operation as far as possible; The cooling water hole pipeline should not be set in the plastic fusion position of the mold cavity, so as not to affect the strength of the injection parts.
另外
濟南注塑加工人員認為大家還要了解，如果進行模具的修改或重新進行模具的設計和制造，這樣就會造成模具和產品生產時間的滯后和經濟的損失，甚失去市場的嚴重后果。
In addition, Ji 'nan injection molding processing staff think that we should also understand that if the mold is modified or re-designed and manufactured, it will cause the lag of mold and product production time and economic loss, and even the serious consequences of losing the market.
所以說對于非注塑件結構和模具結構及澆注系統所產生的缺陷痕跡，只要通過試模，找出缺陷產生的原因后加以改進塑料品種、質量、配方、工藝方法、加工參數、設備和加工環境等后便可。
Therefore, for non-injection molded parts structure and mold structure and pouring system produced by the defect trace, as long as through the mold test, find out the cause of the defect to improve the plastic variety, quality, formula, process method, processing parameters, equipment and processing environment can be eliminated.
問題的講解內容基本上就是這樣了，如果期間出現問題不及時進行的話就會影響到注塑加工產品的質量，所以一旦發現不對就要趕緊處理。更多內容就來網站
www.195ty.com進行咨詢吧。
The content of the problem is basically like this, if the problem is not solved in a timely manner, it will affect the quality of injection molding products, so once found wrong to deal with quickly. For more information, please visit www.195ty.com.
